A fitted wardrobe in Dubai costs roughly AED 1,200 to AED 3,500 per linear metre supplied and installed in 2026, set by the finish you choose. A standard 3 to 4 metre bedroom wardrobe runs AED 8,000 to AED 20,000; a floor-to-ceiling master unit in lacquer with drawers and LED is AED 15,000 to AED 35,000; and a full walk-in dressing room reaches AED 60,000 to AED 150,000+. Finish, door type, and internal fittings are what move the number.
A fitted wardrobe is priced very differently from a freestanding one you buy off the shelf. It is built to the exact dimensions of your room, so the cost is quoted per linear metre of joinery rather than per unit. That single number, the rate per linear metre, is set almost entirely by the finish, and it drives the whole quote once you multiply it by the run of your wall.
This guide is about price, not design. If you want to compare door styles, layouts, and material looks, our custom wardrobe Dubai design guide covers that side. Here the focus is the AED figure: the per-metre rate by finish, how hinged and sliding doors compare, the gap between a reach-in and a walk-in, what internal fittings add, and two worked examples so you can size your own budget.
Quick Cost Summary: Dubai Fitted Wardrobe 2026
Reach-in / basic
AED 3,500–8,000
2–3 m, melamine, hinged
Standard bedroom
AED 8,000–35,000
3–5 m, lacquer, drawers + LED
Walk-in closet
AED 25,000–150,000+
6–15 m, veneer, island
Fitted Wardrobe Cost Per Linear Metre by Finish
This is the table most people want. It is the rate for a floor-to-ceiling run of wardrobe joinery, supplied and installed at Dubai 2026 rates. Multiply the rate by the width of your wall in metres to get a rough carcass-and-door total, then add internal fittings on top.
| Finish | Cost / linear m | Durability | Look & notes |
|---|---|---|---|
| Melamine / laminate MDF | AED 700–1,200 / linear m | Good | Clean, wide colour and wood-grain range, entry level |
| PVC wrap (thermofoil) | AED 1,000–1,500 / linear m | Good | Seamless matt or gloss, good value mid-range |
| Acrylic (high-gloss) | AED 1,400–2,200 / linear m | Very good | Mirror-like gloss, contemporary, shows fingerprints |
| Lacquer (matt or gloss) | AED 1,500–2,500 / linear m | Very good | Smooth premium finish, the most popular Dubai choice |
| Natural veneer | AED 2,000–3,500 / linear m | Excellent | Real wood grain, warm and high-end |
| Solid wood | AED 2,500–4,500+ / linear m | Excellent | Timeless, heaviest and most costly |
Rates reflect Dubai joinery pricing for 2026, supplied and installed. Excludes internal fittings and lighting. Contact Renovel for a project-specific quote.
Hinged vs Sliding Door Cost
After the finish, the door type is the next big swing in a wardrobe quote. Sliding doors carry a track and roller system that hinged doors do not, so they cost more per linear metre, but they save the swing clearance that a small Dubai bedroom often cannot spare. These rates are the door element, layered on top of the carcass.
| Door type | Cost / linear m | Strengths | Trade-offs |
|---|---|---|---|
| Hinged doors | AED 900–2,500 / linear m | Full-width access, cheaper hardware, more internal layout freedom | Needs clearance to swing open, less suited to tight rooms |
| Sliding doors | AED 1,400–3,200 / linear m | No swing clearance, ideal for narrow bedrooms, sleek panels | You only ever see half the interior at once, roller tracks need upkeep |
| Sliding with mirror | AED 1,600–3,500 / linear m | Doubles as a full-length mirror, brightens small rooms | Adds weight to the track, heavier glazed panels cost more |
| Open frame / walk-in modules | AED 800–1,800 / linear m | No doors at all, lowest cost per metre, fast to fit | Everything is on display, dust exposure without glass fronts |
Reach-In vs Walk-In: Total Cost by Layout
A reach-in wardrobe lines a single wall and you reach in from the front. A walk-in is a room you step into, with joinery on two or three walls, so it carries far more linear metres and usually more fittings. The table below maps common Dubai layouts to a realistic total, supplied and installed.
| Layout | Typical spec | Total (2026) |
|---|---|---|
| Reach-in, 2 m single wall | Melamine, hinged, basic rails and shelves | AED 3,500–6,500 |
| Standard bedroom, 3–4 m wall | PVC or lacquer, sliding, drawers + hanging + shelves | AED 8,000–20,000 |
| Master bedroom, floor-to-ceiling 4–5 m | Lacquer, hinged, soft-close, LED, internal drawers | AED 15,000–35,000 |
| Compact walk-in, 6–8 linear m | Lacquer, open modules, drawers, LED, mirror | AED 25,000–50,000 |
| Full dressing room, 10–15 linear m | Veneer, island, shoe wall, glass display, vanity | AED 60,000–150,000+ |
Walk-in and dressing-room totals rise quickly with an island, glass fronts, and a vanity station. Figures per Dubai 2026 joinery rates.
The jump from a reach-in to a walk-in is not just the finish, it is the meterage. A 3 metre reach-in carries 3 linear metres of joinery. A modest U-shaped walk-in in the same bedroom footprint can carry 9 to 12 linear metres once you line three walls, which is why the total multiplies even before you add an island. If budget is the priority, a well-fitted reach-in on one wall gives most of the storage of a walk-in for a fraction of the cost.
Internal Fittings and Add-On Costs
Two wardrobes of identical size and finish can differ by AED 15,000 purely on what is inside. Hanging rails and shelves are cheap; drawers, lighting, pull-outs, and glass fronts are where a quote climbs. Every figure below is supplied and installed at Dubai 2026 rates.
| Fitting | Cost | Notes |
|---|---|---|
| Soft-close hinges / runners | + AED 15–45 per door or drawer | Blum or Hettich hardware. The single upgrade that most changes daily feel. Budget carcasses use basic hinges. |
| Internal drawers (per unit) | AED 250–700 each | Box drawers with soft-close runners. Glass-fronted or leather-lined jewellery drawers sit at the top of the range. |
| LED strip lighting | AED 400–1,200 per run | Sensor or door-triggered warm-white strips along shelves and rails. Wiring to an existing point keeps cost down. |
| Pull-out trouser / tie racks | AED 200–600 each | Side-mount or front-pull metal racks. Practical in a hinged unit, harder to fit behind sliding doors. |
| Pull-out shoe racks | AED 300–900 each | Angled or flat pull-outs. A dedicated shoe wall in a walk-in is priced by the linear metre instead. |
| Lift-up / pull-down hanging rail | AED 350–800 each | Brings a high rail down to reach in tall floor-to-ceiling units. Useful under 2.4 m ceilings. |
| Mirror (internal or door) | AED 300–1,500 | Pull-out valet mirror or a full door mirror. Glazed sliding panels are priced with the door, not here. |
| Glass display fronts | + AED 400–1,000 per module | Framed or frameless glass doors for a boutique look in a walk-in. Adds weight and hardware cost. |
| Central island (walk-in) | AED 6,000–25,000 | Drawer island with a stone or laminate top. Size, top material, and drawer count drive the price. |
Best Materials for Dubai Humidity
Dubai's coastal humidity and heavy air conditioning are hard on wardrobe joinery, especially inside a closed unit against an external wall. The failure everyone wants to avoid is swelling or delamination along a cut edge. A few choices at the quote stage prevent it:
- Moisture-resistant board. Ask for moisture-resistant MDF (MR or HMR grade) rather than standard board for carcasses and doors. It costs a little more and resists the swelling that raw board suffers in humid rooms.
- Fully sealed surfaces. PVC wrap, acrylic, and lacquer all seal the panel face against moisture. These sealed finishes generally cope better in humidity than an open natural-wood surface that has not been properly finished.
- Edge-banding on every cut. The cheapest corner to cut, literally, is leaving raw edges exposed. Insist that every cut edge is edge-banded so moisture cannot wick into the core. This is the single most common cause of wardrobe failure in Dubai apartments.
- Ventilation and gaps. A small gap behind the unit and vented plinths let air move, which matters against a cold external wall where condensation can form. Good joiners build this in.
- Veneer and solid wood with care. Both look superb but move more with humidity. They perform well on a stable engineered core with sealed edges, less well as raw solid panels. Discuss the core build, not just the surface look.
Worked Example 1: Standard Bedroom Wardrobe
A 4 metre floor-to-ceiling wardrobe along one bedroom wall in a Dubai apartment, matt lacquer over moisture-resistant MDF, hinged doors with soft-close, and a practical internal layout. This is the most common fitted-wardrobe project we quote.
Indicative Dubai 2026 pricing. A plain melamine version of the same wardrobe with basic hardware and no lighting would land closer to AED 5,500 to AED 7,000.
Worked Example 2: Full Walk-In Closet
A U-shaped walk-in dressing room of roughly 12 linear metres in a Dubai villa or large apartment, natural veneer finish, open modules with glass display fronts, a central drawer island, a shoe wall, and full LED lighting.
Indicative Dubai 2026 pricing. A lacquer specification without the island and glass fronts on the same footprint would sit closer to AED 35,000 to AED 45,000.
What to Ask Before You Accept a Wardrobe Quote
Fitted-wardrobe quotes are easy to compare wrongly because the headline price hides the spec. Ask every joiner these before you sign:
- What finish is the per-metre rate based on? Melamine and lacquer are worlds apart in price and look. Get the finish named.
- Is the board moisture-resistant, and are all edges banded? This is what keeps a wardrobe from swelling in Dubai humidity. Do not assume it is included.
- What hardware brand? Blum and Hettich soft-close runners last; unbranded hardware is where a cheap quote saves money you will notice daily.
- Are internal fittings and lighting included or extra? Drawers, LED, and pull-outs are often quoted separately. Confirm what the headline number actually contains.
- Is installation and site measurement included? A fitted wardrobe is measured and installed on site, not delivered flat-pack. Confirm both are in the price.
- What is the lead time and warranty? Custom joinery usually runs 3 to 5 weeks. A reputable maker warranties workmanship and hardware for at least 1 to 2 years.
Get a Fixed-Price Fitted Wardrobe Quote
Renovel designs and builds made-to-measure wardrobes and walk-in closets across Dubai and the UAE. Site visit, measurement, and consultation are free.
Related Guides
Frequently Asked Questions
How much does a fitted wardrobe cost in Dubai?
▾
In 2026, a fitted wardrobe in Dubai costs roughly AED 1,200 to AED 3,500 per linear metre supplied and installed, depending on the finish. A standard 3 to 4 metre bedroom wardrobe runs about AED 8,000 to AED 20,000. A floor-to-ceiling master wardrobe in lacquer with internal drawers and LED lighting typically lands at AED 15,000 to AED 35,000. Budget melamine builds start lower, and veneer or solid-wood units push higher.
How much does a custom wardrobe cost per linear metre in Dubai?
▾
Melamine and laminate MDF start at about AED 700 to AED 1,200 per linear metre. PVC wrap sits at AED 1,000 to AED 1,500. Lacquer, the most popular finish in Dubai, runs AED 1,500 to AED 2,500. Natural veneer is AED 2,000 to AED 3,500, and solid wood tops the range at AED 2,500 to AED 4,500 or more. The linear-metre rate is the number that drives the whole quote, so confirm which finish a price is based on.
How much does a walk-in closet cost in Dubai?
▾
A compact walk-in closet of 6 to 8 linear metres in a mid-range lacquer finish costs about AED 25,000 to AED 50,000. A full dressing room of 10 to 15 linear metres with a central island, shoe wall, glass display fronts, and a vanity typically runs AED 60,000 to AED 150,000 or more. The main cost drivers are the linear meterage of joinery, the finish, and specialty features such as the island and glass fronts.
Are hinged or sliding wardrobe doors cheaper in Dubai?
▾
Hinged doors are usually cheaper, at roughly AED 900 to AED 2,500 per linear metre, because the hardware is simpler. Sliding doors run AED 1,400 to AED 3,200 per linear metre due to the track and roller system, and mirrored sliding panels cost more again. Sliding doors are still worth the premium in narrow bedrooms where there is no room for a door to swing open.
Which wardrobe material is best for Dubai humidity?
▾
Moisture-resistant MDF (often labelled MR or HMR board) with a fully sealed finish such as PVC wrap, acrylic, or lacquer is the most reliable choice for Dubai. These sealed surfaces resist the swelling that raw or poorly edged board suffers in humid coastal apartments. Solid wood and veneer look excellent but need a stable engineered core and properly sealed edges to stay flat. Ask that every cut edge is edge-banded, not left exposed.
What adds the most cost to a fitted wardrobe in Dubai?
▾
After the finish and the linear meterage, the biggest cost drivers are internal fittings and specialty features. Soft-close hardware, internal drawers at AED 250 to AED 700 each, LED lighting at AED 400 to AED 1,200 per run, pull-out racks, glass display fronts, and a walk-in island can add tens of thousands to a large project. A plain hanging-and-shelving layout in the same footprint costs far less than a fully fitted one.